Arctic's Open Source RGB Laser Host

Hi folks!

This is my humble contribution for this community.. I'm not good to write stories so here it is:

Arctic's Open Source RGB laser host for Opt Lasers Micro RGB module




PART LIST:

- OptLasers Micro RGB module >>
- Micro RGB Controller from Bigclive.com >>
- Matek Micro 5V & 12V Power Distribution Board >>
- 3D Printed Host >>
- 2pcs 12mm Anti-Vandal LED switch (for RGB controller) >>
- 1pcs Sci Parts - Ø 20,2mm R13 Rocker Switch >>
- 1pcs Fischer Elektronik ICK 40X40 HeatSink (for OptLasers driver board) >>
- 3pcs 20mm battery contact PCB w/ springs
- M3 & M4 bolts & Nuts
- Some resistors, 26AWG silicon wire etc


HOST:










Host Material: Black PETG
Printable Parts: 7 PCS
Plastic volume: 461237.16 mm^3 (461.24 cc)
Filament length: 72301.1 mm (72.30 m)
Plastic weight: 576.55 g (1.27 lb)

3D parts Print Price: 300€


3D Files D/L link:
DOWNLOAD >>

This host is released with Creative Commons CC0 license. DO whatever you want whit it, Host design is 100% FREE!

:beer:


Cheers!