Hi Folks,
I would like to share a Chinese host i modded, I received this host for free with my order from Lasertechgear and other goodies. Well i have a bunch offices so i'll start with the first eight for this thread. I don't buy chinese lasers but i'm sure many are very good , i just prefer to build my own. Don't like dealing with all those different threads and glued in parts and so on.so i drilled the sink to fit a 12mm module the best i could.and fitted in a 21mm contact board. drilled and tapped with a 4-40 set screw in the sink.
In it is ;
1) NUMB44 diode - A.Barnett
2) X Drive set to 3.5A - Flameingpyro
3) 2-16340 AW protected cells
4) G2 lens tested / and a 3 element lens tested
Rich:)
I would like to share a Chinese host i modded, I received this host for free with my order from Lasertechgear and other goodies. Well i have a bunch offices so i'll start with the first eight for this thread. I don't buy chinese lasers but i'm sure many are very good , i just prefer to build my own. Don't like dealing with all those different threads and glued in parts and so on.so i drilled the sink to fit a 12mm module the best i could.and fitted in a 21mm contact board. drilled and tapped with a 4-40 set screw in the sink.
In it is ;
1) NUMB44 diode - A.Barnett
2) X Drive set to 3.5A - Flameingpyro
3) 2-16340 AW protected cells
4) G2 lens tested / and a 3 element lens tested
Rich:)