Another 495nm cfmod GH04955A2G

I bought a couple cfmod "pens" and wanted to put in the GH04955A2G that I got from Styro becuase I really liked the way jnrpop's looked. This was my fist time pressing a diode and it went good! :D

I picked up the powder coated black 22mm HS and adapter is from Lifetime, and I'm glad I did because the 22mm HS I got from DTR were about 0.5mm too small in diameter to fit the adapter.

My phone camera makes them seem more blue than in person. I set the flexdrive to just a little under 100mA to try and keep it more blue if possible.
It came out to be around 35mW and just SLIGHTLY more blue than the 140mW 495 I got from Lifetime.

Also the full size copper back half was able to fit inside with the flexdrive. :cool: Tapping a 3mm hole in the bottom actually turned out pretty good and did not pinch the 26awg wire even after unscrewing a few times to check.










My cfmod

Lifetime's build