I have been getting slack in my old age. Using Standard S4 Hosts and installing a DTR Module with driver already included.
Sharp 505nm. DTR 12mm Copper with Boost Driver. 2 Element Green lens. S4 Host from Survival Lasers.
Measured output with my Laserbee is 103 mW.
An interesting Colour. Best described as Pea Green. When you put a 532nm next to it the colour difference is very obvious.
Sharp 505nm. DTR 12mm Copper with Boost Driver. 2 Element Green lens. S4 Host from Survival Lasers.
Measured output with my Laserbee is 103 mW.
An interesting Colour. Best described as Pea Green. When you put a 532nm next to it the colour difference is very obvious.