The time has come for me to sell off most of my laser stuff. No, I'm not leaving the hobby, quite the opposite actually. I'm likely going to be moving across the country come August (going to grad school to get my PhD in optics :D ), and I won't be able to bring everything so it's time to begin liquidating! Also, I need funds for my GIANT solid state laser project, so buy my shit!!
Spartan 50mW 589nm $375 shipped to US
I love this laser, but I have two 589nm units so one deserves to go to a home where it will get more use! On cold startup (3.8V from DC PSU) it hovers around the 85mW mark for one minute. Apparently it likes running cooler, because in summer it runs ~30mW lower. Still a good laser, runs TEM00 and fairly stable for a 589nm unit.
pics:
http://styropyro.com/images/lpf/sale/sp1.jpeg
http://styropyro.com/images/lpf/sale/sp2.jpeg
http://styropyro.com/images/lpf/sale/sp3.jpeg
CNI GLP Green laser, 150mW $125 shipped
This is a very nice greenie. A CNI GLP that does not drop below 150mW over a minute from cold startup (3.0V on DC PSU) and peaks over 170mW. This laser is running at near the highest possible 532nm output from a pen laser while still being rated for a long life.
pics:
http://styropyro.com/images/lpf/sale...14_125434.jpeg
http://styropyro.com/images/lpf/sale...14_125444.jpeg
Plug n Play 40W CO2 Laser $300 shipped to the US
If you like burning things, this is the laser for you. :evil: Includes 40W laser tube, power supply, water pump, and makeshift controller. Simply attach water lines and HV power lines, hit the switch, and a deep IR heat beam will be emitted. I bought this laser from jefferythe00 years ago, and it has treated me great, plus I have switched out the old PSU for a new one since then. I have had lots of fun with this (including accidentally shooting a hole through the garage door ) Plus, it has the convenient property that regular $2 safety goggles from the store block this wavelength. It is the one from the following video:
https://www.youtube.com/watch?v=tMvo0-ZlJGg
pic: http://styropyro.com/images/lpf/sale/co2.jpeg
WARNING: This laser will KILL YOU if mistreated!! Take all HV safety precautions when operating this laser!!!
Plug n Play MONSTER Pulsed Er:Yag Laser $650 shipped to the US.
This BEAST laser averages around 20W with peaks in the kilowatts. The pulses are so powerful that it leaves little craters in nearly everything it is pointed towards. It has an adjustable pulse rate, and a remote trigger. Nearly equivalent systems on eBay go for ~$1000. It is the laser from my video here:
https://www.youtube.com/watch?v=EZl0PweNzEA
WARNING: This laser will KILL YOU if mistreated!! Take all HV safety precautions when operating this laser!!!
B+W Anamorphic Prism Pairs $20 shipped each to US.
Coated for 808nm, but members have reported success with correcting 638nm beams.
Empty B+W Labby modules $25 shipped each to US.
Great for constructing your own labby laser!
Small things for sale that MUST be purchased with one of the items above!
445nm diode module extracted from a 1W lasever labby, still works. Comes with small heatsink and lens. $10
will be adding more stuff later...
Spartan 50mW 589nm $375 shipped to US
I love this laser, but I have two 589nm units so one deserves to go to a home where it will get more use! On cold startup (3.8V from DC PSU) it hovers around the 85mW mark for one minute. Apparently it likes running cooler, because in summer it runs ~30mW lower. Still a good laser, runs TEM00 and fairly stable for a 589nm unit.
pics:
http://styropyro.com/images/lpf/sale/sp1.jpeg
http://styropyro.com/images/lpf/sale/sp2.jpeg
http://styropyro.com/images/lpf/sale/sp3.jpeg
CNI GLP Green laser, 150mW $125 shipped
This is a very nice greenie. A CNI GLP that does not drop below 150mW over a minute from cold startup (3.0V on DC PSU) and peaks over 170mW. This laser is running at near the highest possible 532nm output from a pen laser while still being rated for a long life.
pics:
http://styropyro.com/images/lpf/sale...14_125434.jpeg
http://styropyro.com/images/lpf/sale...14_125444.jpeg
Plug n Play 40W CO2 Laser $300 shipped to the US
If you like burning things, this is the laser for you. :evil: Includes 40W laser tube, power supply, water pump, and makeshift controller. Simply attach water lines and HV power lines, hit the switch, and a deep IR heat beam will be emitted. I bought this laser from jefferythe00 years ago, and it has treated me great, plus I have switched out the old PSU for a new one since then. I have had lots of fun with this (including accidentally shooting a hole through the garage door ) Plus, it has the convenient property that regular $2 safety goggles from the store block this wavelength. It is the one from the following video:
https://www.youtube.com/watch?v=tMvo0-ZlJGg
pic: http://styropyro.com/images/lpf/sale/co2.jpeg
WARNING: This laser will KILL YOU if mistreated!! Take all HV safety precautions when operating this laser!!!
Plug n Play MONSTER Pulsed Er:Yag Laser $650 shipped to the US.
This BEAST laser averages around 20W with peaks in the kilowatts. The pulses are so powerful that it leaves little craters in nearly everything it is pointed towards. It has an adjustable pulse rate, and a remote trigger. Nearly equivalent systems on eBay go for ~$1000. It is the laser from my video here:
https://www.youtube.com/watch?v=EZl0PweNzEA
WARNING: This laser will KILL YOU if mistreated!! Take all HV safety precautions when operating this laser!!!
B+W Anamorphic Prism Pairs $20 shipped each to US.
Coated for 808nm, but members have reported success with correcting 638nm beams.
Empty B+W Labby modules $25 shipped each to US.
Great for constructing your own labby laser!
Small things for sale that MUST be purchased with one of the items above!
445nm diode module extracted from a 1W lasever labby, still works. Comes with small heatsink and lens. $10
will be adding more stuff later...