Hi guy's,
I have a Aspire Mech-Mod + 2 screw-on heatsink setup's, for sale.
I've already got a setup similar so this one is up for grab's!!!
Cost: $60 USD
Shipping: $15 USD, tracked international
Paypal only :)
Sale includes:
1x Aspire Mech-mod 18650 - Brand new
1x DTR22mm Heatsink with 510 adapter to suit the Aspire
1x Custom Aluminium Heatsink with Cylindrical len's correction Module to suit
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Info on the Custom Heatink:
Custom Diode Module Section:
- I built a few of these to hold DTR's 20mm copper module, also will hold a 21mm.
- Screws onto the 510 Adapter also supplied
- It measure's L65.4mm x D25mm x Thick1.5mm
- Made from Aluminium with a silver inox coating
- Has 22awg Silicone wire already installed for Plug and Play with a module
- Use's a special s/s end component to fit with the Cylindrical module explained next
Custom Cylindrical Module section:
- This section press's into the Diode module very tightly using precise machining and rubber washe's. Can be removed and re-inserted how every many time's you like.
- It Measure's: L70mm x D25mm x Thick1.5mm , Inside diameter: D22mm
- NO LEN'S INCLUDED guys, this will need to be built, similar to other setups in the NUG44 correction thread. (Len's mounted on a s/s ruler and then placed inside this module)
Any more question's please ask, There is alittle bit of work with the Custom Heatsink, so i'm not calling it Plug & Play, but it won't be hard to finish up.
Picture's will help explain.
Cheer's :beer:
I have a Aspire Mech-Mod + 2 screw-on heatsink setup's, for sale.
I've already got a setup similar so this one is up for grab's!!!
Cost: $60 USD
Shipping: $15 USD, tracked international
Paypal only :)
Sale includes:
1x Aspire Mech-mod 18650 - Brand new
1x DTR22mm Heatsink with 510 adapter to suit the Aspire
1x Custom Aluminium Heatsink with Cylindrical len's correction Module to suit
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Image may be NSFW.
Clik here to view.
Info on the Custom Heatink:
Custom Diode Module Section:
- I built a few of these to hold DTR's 20mm copper module, also will hold a 21mm.
- Screws onto the 510 Adapter also supplied
- It measure's L65.4mm x D25mm x Thick1.5mm
- Made from Aluminium with a silver inox coating
- Has 22awg Silicone wire already installed for Plug and Play with a module
- Use's a special s/s end component to fit with the Cylindrical module explained next
Custom Cylindrical Module section:
- This section press's into the Diode module very tightly using precise machining and rubber washe's. Can be removed and re-inserted how every many time's you like.
- It Measure's: L70mm x D25mm x Thick1.5mm , Inside diameter: D22mm
- NO LEN'S INCLUDED guys, this will need to be built, similar to other setups in the NUG44 correction thread. (Len's mounted on a s/s ruler and then placed inside this module)
Any more question's please ask, There is alittle bit of work with the Custom Heatsink, so i'm not calling it Plug & Play, but it won't be hard to finish up.
Picture's will help explain.
Cheer's :beer: