I will be buying the NDG7475 1W 520nm Laser Diode In 12mm Copper Module W/Driver from DTR's Laser shop in about a month, and was looking for some pointers cause this is my first build.
I was wondering the things I need to build a proper host, I plan on machining whatever parts I can but aside from two Li-ion batteries, what else do I need. I also want to pump the diode up to about around 1.2w and wanted to know how I go about doing that.
Sorry if there are already guides, I did look around a bit but only found the host's guide.
Thank you for the help.
I was wondering the things I need to build a proper host, I plan on machining whatever parts I can but aside from two Li-ion batteries, what else do I need. I also want to pump the diode up to about around 1.2w and wanted to know how I go about doing that.
Sorry if there are already guides, I did look around a bit but only found the host's guide.
Thank you for the help.