Hi
new here, would love some helpful advice on a choice of battery to power a 900mW 405nm BDR-209 Blu-Ray Copper Laser Module W/Boost Driver & G-2 Glass Lens
Specs
Wavelength 405nm +/- 5nm
Input Voltage 3V-5.5V
Driver Output Current 600mA(default)
Driver Current Draw 1100mA +/- 0.5A
Power Output 900mW-1000mW
Driver Type Constant Current
Lens 9mm Threaded 405-G-2 Glass Lens
Reverse Polarity Protection Yes driver will blow fuse to prevent damage to diode
Duty Cycle Continuous with proper heatsinking
Link to Dtr 900mW 405nm BDR-209 Blu-Ray Copper Laser Module W/Boost Driver & G-2 Glass Lens | eBay
What would one recommend to power this diode from a battery source.
Would a Single Panasonic 18650 3400 mAH do the job ?
What are my choices of batteries ?
Thank you in advance
new here, would love some helpful advice on a choice of battery to power a 900mW 405nm BDR-209 Blu-Ray Copper Laser Module W/Boost Driver & G-2 Glass Lens
Specs
Wavelength 405nm +/- 5nm
Input Voltage 3V-5.5V
Driver Output Current 600mA(default)
Driver Current Draw 1100mA +/- 0.5A
Power Output 900mW-1000mW
Driver Type Constant Current
Lens 9mm Threaded 405-G-2 Glass Lens
Reverse Polarity Protection Yes driver will blow fuse to prevent damage to diode
Duty Cycle Continuous with proper heatsinking
Link to Dtr 900mW 405nm BDR-209 Blu-Ray Copper Laser Module W/Boost Driver & G-2 Glass Lens | eBay
What would one recommend to power this diode from a battery source.
Would a Single Panasonic 18650 3400 mAH do the job ?
What are my choices of batteries ?
Thank you in advance