So I bought Alex's (Mariomaster) Melles Griot 643 Ar/Kr laser at SELEM and, being the extra cautious person that I am, have a few questions that I would like answered before I fire it up. Alex is evidently too busy to check his PM's, so I'll ask it here.
-For a 220V connection, the PSU's wires color code is, the green wire being ground, and blue & brown wires hot.
-I measured the voltage from the two phases at my house and it is 245V, is that still OK for the PSU?
- How often is it recommended to run a Ar/Kr laser like this? Once every few months?
BTW, This is the box I made for putting the two 120V phases together for the PSU.
Image may be NSFW.
Clik here to view.
-For a 220V connection, the PSU's wires color code is, the green wire being ground, and blue & brown wires hot.
-I measured the voltage from the two phases at my house and it is 245V, is that still OK for the PSU?
- How often is it recommended to run a Ar/Kr laser like this? Once every few months?
BTW, This is the box I made for putting the two 120V phases together for the PSU.
Image may be NSFW.
Clik here to view.
