Here's the shots of all my 510-520nm greens other than ones that only have a momentary switch. You can see the the 405nm here:
http://laserpointerforums.com/f38/pe...ete-98331.html
and the 445-473nm+ here:
http://laserpointerforums.com/f65/pe...ml#post1438419
Starting on top 410 to the 1.5W peak 520nm:
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
I will be adding all my 532nm that have an on switch also but probably not til tomorrow.
OK, it's tomorrow today so here we go with the 532nm as promised. Again these are the ones that have a constant on as there are a whole lot more that have momentary switches that will not be shown. I had to group them somehow as there are just so many of them.
What I want you to notice with 532nm is the yellow. There's a yellow component to a 532nm that you don't see with the 510-520nm. With the 510-520 you see a blue component. You can also sometimes notice a beam here and there that looks a little different than others.
The outputs are all measured with their IR as that's the way almost all 532nm come. A little green goes a long way.
First group of 30mW to just over 100mW:
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Next grouping are all under 80mW. Yes there's fog in all the pics but to keep everything consistent but you just don't need it;)
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
These are 80-99mW:
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
100mW to 156mW:
![]()
![]()
![]()
![]()
![]()
![]()
![]()
3 class 4. I know what you are thinking, only 3 class 4 532nm lol
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
![]()
Not a single unit blew by the way and a lot of them were adjusted for max output before I built them;)
That's it for the greens but I will work on the 635nm-685nm next and then figure out how I'm going to do the 589nm rainbow stuff. So, expect the red section to have a new thread this morning:)
I may look over my other 510-520nm that only have momentary switches to see if I can add those pics to the others as it would be nice to see more of those. May have to hold them in my hands or maybe try some kind of clip.
http://laserpointerforums.com/f38/pe...ete-98331.html
and the 445-473nm+ here:
http://laserpointerforums.com/f65/pe...ml#post1438419
Starting on top 410 to the 1.5W peak 520nm:
I will be adding all my 532nm that have an on switch also but probably not til tomorrow.
OK, it's tomorrow today so here we go with the 532nm as promised. Again these are the ones that have a constant on as there are a whole lot more that have momentary switches that will not be shown. I had to group them somehow as there are just so many of them.
What I want you to notice with 532nm is the yellow. There's a yellow component to a 532nm that you don't see with the 510-520nm. With the 510-520 you see a blue component. You can also sometimes notice a beam here and there that looks a little different than others.
The outputs are all measured with their IR as that's the way almost all 532nm come. A little green goes a long way.
First group of 30mW to just over 100mW:
Next grouping are all under 80mW. Yes there's fog in all the pics but to keep everything consistent but you just don't need it;)
These are 80-99mW:
100mW to 156mW:
3 class 4. I know what you are thinking, only 3 class 4 532nm lol
Not a single unit blew by the way and a lot of them were adjusted for max output before I built them;)
That's it for the greens but I will work on the 635nm-685nm next and then figure out how I'm going to do the 589nm rainbow stuff. So, expect the red section to have a new thread this morning:)
I may look over my other 510-520nm that only have momentary switches to see if I can add those pics to the others as it would be nice to see more of those. May have to hold them in my hands or maybe try some kind of clip.